Bonide Stump-Out dissolves the lignin binding between cellulose layers of the stump making it porous. When kerosene or fuel oil is poured onto the stump and the stump is ignited, it can burn down to the roots. Safe, easy to use, non-explosive and will not harm surrounding vegetation. Stumps do not burn with any open flame or billowing smoke when treated with this product. Therefore, it may still be used in locales that prohibit open burning. If burning is not desired, this product may still be used to accelerate the process of natural decomposition. In any case, depending on the size of the stump, the whole process may take several weeks. Green, freshly cut stumps should be seasoned (small stumps at least one year, large stumps at least 18 months).
CAUTION: Avoid contact with eyes, skin and clothing. Should contact occur, wash with plenty
of water. Store in a cool dry place safe from pets and children. Disposal: Wrap in paper and
discard in trash. Keep away from children. Wash up after each use. Drill 1-inch holes straight down from top of stump to
depth of about 10 inches. Then into the side of the stump, about 4 to 5 inches down from the top, drill a
1-inch wide hole slanting downward toward the bottom of each vertical hole. The two hole ends should meet.
It is important to drill the side holes slanting downward so the liquid to be poured into the holes won’t run out.
Also when the drill holes meet, a natural ventilation is created to destroy the stump when ignited.
After holes are drilled as directed, follow this procedure:
1. Pour 4-6 oz. Stump-Out into each hole.
2. Fill holes with water.
3. Let stand for 4-6 weeks.
4. After 4-6 weeks, fill with kerosene or fuel oil.
5. Let stand until kerosene or fuel oil is completely absorbed into stump - 4-5 weeks, depending on size of stump.
6. Next pour enough kerosene onto the stump to ignite it.
7. The stump will now burn with a smoldering red glow clear down to the roots, until only
harmless ashes are left.
DIRECTIONS FOR USE
For smaller stump disposal (12-18 inches wide), drill 2 sets of holes in each stump, proceed as directed.
For larger diameter stumps, 18 inches or wider, drill a minimum of 4 sets of holes. Proceed as directed.
For more efficient stump disposal, drill additional sets of holes in each stump. Proceed as directed.
We will process your order the day we receive it.
This product usually leaves our warehouse the Next Business Day.
You will normally get your order in 3 - 7 business days (depending on how far you are from the warehouse).
Shipping rates are calculated based on: