Cutrine Plus Algaecide / Herbicide 12 lbs.
Enter the quantity below and click "add to cart":
Category(s):
-
Herbicides and Algaecides
Manufacturer:
APPLIED BIO CHEMISTS
This product cannot ship to CT, DC, MA, ME, NJ, NY, VT due to state restrictions.BASIC FACTS: CUTRINE®-PLUS
- Is a liquid formulation which contains 9.0% active ingredient.
- Contains 0.909 pounds of copper per gallon.
- Has a specific gravity of 1.21 (10.1 lbs. per gallon).
- Controls algae at 0.2 to 0.4 ppm copper and hydrilla at 0.4 to 1.0 ppm
copper.
- Controls all three forms of algae: planktonic, filamentous and chara.
ADVANTAGES
- CUTRINE®-PLUS is U.S.E.P.A. registered for use in drinking water
reservoirs, farm fish and industrial ponds, golf course water hazards,
lakes, fish hatcheries and raceways, irrigation water conveyance systems
such as canals, laterals and ditches.
- CUTRINE®-PLUS is far less corrosive to equipment and other metal surfaces
than other chelated copper compounds.
- CUTRINE®-PLUS treated water can be used for swimming, domestic uses and
livestock watering immediately after chemical application.
- Water from treated lakes, ponds, irrigation systems and golf course water
hazards may be used to irrigate turf, fairways, putting greens and
ornamental plants.
- Fish can be caught and consumed immediately after CUTRINE®-PLUS
application.
- CUTRINE®-PLUS will not plate-out or precipitate under normal storage
conditions nor does the copper in CUTRINE®-PLUS precipitate out and become
ineffective in alkaline or hard water.
- CUTRINE®-PLUS has been used successfully in trout ponds which contained
cold, hard water.
- CUTRINE®-PLUS is available in two formulations (liquid and granular) for
controlling floating, suspended and bottom-growing types of algae.
- CUTRINE®-PLUS effectively controls the noxious submersed weed, Hydrilla
verticillata, without requiring post-treatment water use restrictions
associated with other herbicides.
- CUTRINE®-PLUS is compatible in tank mixes with the aquatic herbicides
Weedtrine®-D, Reward and Aquathol K.
- CUTRINE®-PLUS can be applied to flowing water using a continuous delivery
drip system. It has been used effectively in trout raceways and irrigation
canals.
APPLICATION RATES:
CUTRINE®-PLUS- is applied at a rate of 0.6 gallon per acre-foot (43,560 cubic
feet) of water to be treated for planktonic and filamentous algae, 1.2 gallons
per acre-foot for Chara and Nitella and 1.2 to 3.0 gallons per acre-foot for
Hydrilla.
METHOD OF APPLICATION:
CUTRINE®-PLUS should be diluted with at least 9 parts of water to facilitate
even distribution during application. Surface spray is most practical for
treatment of planktonic and filamentous algae. Bottom-growing algae should be
treated by underwater injection or by application of CUTRINE®-PLUS GRANULAR.
Hydrilla can be treated by surface spray or underwater injection.
CONTAINER SIZES:
CUTRINE®-PLUS is available in 1 gallon (packed 4 to a case), 2 1/2 gallon
(packed 2 to a case), 5 gallon, 30 gallon, 55 gallon and 275 gallon containers.
NOTE:
CUTRINE®-PLUS need sunlight to optimize effectiveness.
CUTRINE®-PLUS is not completely effective against Pithophora and diatoms.
CUTRINE®-PLUS can be toxic to trout, at the recommended application rates, if
the water has less than 50 ppm of carbonate hardness (soft water). Do not use in
waters containing Koi and hybrid goldfish. Not intended for use in small volume,
garden pond systems.
OF SPECIAL INTEREST:
CUTRINE®-PLUS has proven to be the favorite algaecide for fish growers because
they can calculate and apply the exact amount of copper they desire. It can
reduce or eliminate taste and odor problems caused by geosmin and MIB producing
blue-green algae. It can be used to reduce the incidence of secondary bacterial
or fungal infections by reducing the phytoplanktonic irritants which can expose
the gill surfaces of the fish.
Added or Last Modified:
5/7/2013
Weight:
13.7500
UPC:
038005902029
Cutrine Plus Algaecide / Herbicide 12 lbs. Additional information:
A concentrated algaecide that effectively controls a broad range of algae
Has no general water use restrictions at label rates
Contains 9.0% elemental copper
Contains no corrosive sulfates unlike similar common algaecides and also provides increased stability
Made in the usa
Material Composition or Ingredients (if applicable):
3.7% Copper From Mixed Ethanolamine Complexes.
Color (if applicable): /
Size (if applicable): 12 lb.
Continental US shipping costs: 16.82
(We do not charge handling)Buy Cutrine Plus Algaecide / Herbicide 12 lbs. and add $56.69 more to your cart to qualify for free shipping. *Weight restrictions may apply.
We will process your order the day we receive it.
This product usually leaves our warehouse the Next Business Day.
You will normally get your order in 3 - 7 business days (depending on how far you are from the warehouse).
Shipping rates are calculated based on:
- Total weight of the products in your cart.
- Individual item shipping carrier fee ( if applicable )
No reviews yet. Be the first to add a rating!