Purpose and Benefits:
The Water Softener Pillow removes hard water minerals and toxic
heavy metals from aquarium water. It consists of a special "pillow" that fits
into aquarium filters providing continuous removal of minerals and heavy metals.
Providing an aquarium with softer water improves fish health and can prevent
unsightly mineral deposits from forming on the aquarium surfaces. Many fishes,
such as tetras, angelfish and South American cichlids prefer the soft water
common to the Amazon River Basin, (50 to 100 ppm GH, typically). The Water
Softener Pillow helps to re-create the soft water found in many tropical areas
of the world where aquarium fish come from. Maintaining a stable aquarium
environment is much easier when using the Water Softener Pillow.
The
Water Softener Pillow contains a special ion-exchange resin that selectively
removes hard water minerals, such as calcium and magnesium, and heavy metals,
such as copper and iron, from freshwater aquariums. In the ion-exchange process,
sodium ions in the resins are exchanged for heavy metals, calcium and magnesium
that cause hard water. When the ion-exchange process is complete, the pouch is
recharged by placing the pillow in a salt solution. Recharging the pillow
reverses the ion-exchange process and makes the pouch ready for re-use. Because
this process exchanges only sodium, it does not add salt to the aquarium, only
harmless sodium ions.
NOTE: heavy metals, like copper and iron, permanently
bind to the resin beads in the Water Softener Pillow. This can gradually reduce
the efficiency of the pillow. If the Water Softener Pillow ceases to function
properly after recharging, it must be replaced.
Average hardness removal
after 48 hours use:
Large Water Softener Pillow
Aquarium Size ppm
(mg/L) Hardness Removed
5 gallons (19L) of water 280 10 gallons (40 L) of
water 140 20 gallons (40 L) of water 70
Extra-Large water Softener Pillow
Aquarium Size ppm (mg/L) Hardness Removed
25 gallons (96 L) of water 220
55 gallons (208 L) of water 110 110 gallons (416 L) of water 55
Directions for Use:
1. Remove pillow from jar and place in the aquarium filter. The
pillow may be placed in the aquarium but the softening process will take
longer.
2. Activity of the pillow lasts 48 hours when placed in the
filter. After 48 hours recharging is necessary.
DIRECTIONS FOR
RECHARGING:
Remove pillow and rinse in tap water. Make a recharging solution
by dissolving 60 g (3 tablespoonfuls) of non-iodized salt in 210 ml (7oz.) of
water. Place the pillow in solution for at least 2 hours for full recharging.
Make a new recharge solution after 4 recharges.
We will process your order the day we receive it.
This product usually leaves our warehouse the Next Business Day.
You will normally get your order in 3 - 7 business days (depending on how far you are from the warehouse).
Shipping rates are calculated based on: